Practical Engineering

  • Home
  • About
  • Blog
  • Books
  • Store
  • Email List

Why Are There So Many Different Transmission Towers?

November 17, 2026 by Wesley Crump

[Note that this article is a transcript of the video embedded above.]

I have a hot take: I really like transmission towers. Sure, a lot of people hate them, and some people even actively campaign against them. And to be fair, they are kind of obtrusive on the landscape. But so much of our modern life is hidden behind shiny enclosures or abstracted away from us without a single hint on the outside about what’s happening on the inside. Electrical transmission lines are the opposite. They’re out in the open for anyone to have a look - a constant reminder of what it takes to power the world. They’ve just been this way in so many places for so long that now they kind of blend in. You might not have ever taken a moment to really look at one of these towers. I want to show you why you should, because some engineers spend their entire careers figuring out all the little details that go into them, and that’s really worth appreciating. I’m Grady, and this is Practical Engineering.

When it comes to overhead electric lines, one of the most important constraints is clearance. We’re used to energized cables having some type of rubberized insulation around them. That’s not how it works at high voltage; too heavy, too expensive. So, they’re just bare conductors, and we basically use the air as insulation. The problem is that, depending on the voltage, electrical current can ionize and flow through the air over a certain distance, a phenomenon known as arcing. So energized conductors have to maintain space between each other, from the ground, from trees, and even from the tower that supports them. You can’t hold up electrical conductors with just vibes, so we use porcelain, glass, or polymer insulators as the attachment point. And the tower that holds those insulators is basically the space in between. There is a practically endless number of ways you can arrange these wires, depending on what you want to accomplish, and that’s part of the reason that there is so much variety in the towers you see in the wild.

But before we get into the ultra high voltage lines, let’s start with the simplest structure used to carry overhead electric lines: the humble utility pole. These are usually made of wood in the US where it’s a fairly abundant material, but across the world you often see them made of concrete, tubular steel, or even fiberglass. Generally, they carry distribution-level voltage, somewhere between 10 and 15 kilovolts, but sometimes up to 35 kV. This is generally classified as medium voltage, or you’ll sometimes just hear it referred to as primary voltage, especially by distribution linesworkers to distinguish it from the lower, secondary voltage that connects to building service panels.

An electric arc usually requires about 20 to 30 kV per centimeter to jump an air gap, so you actually don’t need much clearance at all around medium voltage conductors to avoid the issue. That’s why the insulators that support overhead distribution lines are relatively small. Of course there are other clearance issues on a utility pole to consider. To avoid contact with vehicles or pedestrians, there are minimum heights above the ground. There are also minimum distances for low voltage and communications lines on the pole so crews can still work on those lines without getting close to the medium voltage stuff. And the lines themselves need to be separated enough on the pole to avoid being blown into each other mid-span.

There’s a lot you can notice on a typical utility pole just looking at the primary conductors. If you’ve never done it before, it’s a pretty interesting exercise to just take a walk from your house and follow the line. It’s actually pretty easy to do if everything’s overhead. Look at the transformer that feeds your house; trace it through the cutout to the primary conductor, and just see where that goes. Are you on a branch that connects to a main feeder from the substation? If you only have one or two phases on the pole, probably so. Most grid infrastructure uses three energized phases, so if you see less than that, they had to split up somewhere. Which distribution substation feeds your neighborhood and what else is connected to it? What’s the last house or building on the line?

It might seem a little silly, but I really think it’s worth getting to know the actual infrastructure that you depend on every day. It’s not mystical stuff; it’s mostly just wires. But there’s something special about turning a substation into my substation. Knowing a bit more about the actual, specific pathway that the power you depend on physically travels is deeply satisfying. I feel the same way about water towers and sewage lift stations, but that’s another video.

Just because of the sheer scale of distribution infrastructure, these poles are relatively standardized. Most of these parts can be picked up from a catalog without a lot of detailed engineering involved. Many utilities develop their own standards and maintain relationships with equipment distributors, so the engineers can put together designs quickly, crews know how to maintain and swap equipment, and so on. When we level up to the transmission side, that changes a lot. You don’t just buy transmission towers "off the rack.”

To move bulk electricity over long distances, we boost the voltage much higher. Losses are a function of electrical current, and the higher the voltage, the lower the current needed to move the same amount of power. A while back, I did a demonstration of this by powering my wife’s hair dryer on two tiny lines of magnet wire by raising the voltage (and bringing it back down) with a couple of microwave transformers. Transmission line voltage classes vary by location, but generally anything up to 230 kilovolts is high voltage, from there to 765 kV is extra high voltage, and anything above that is ultra-high voltage. And at that level, those centimeters of clearance needed at medium voltage become many meters.

The structures that support overhead transmission lines are typically called towers or pylons, and they are often custom-engineered for a specific project. That’s because there are so many things to balance. Of course, there’s cost. Transmission lines are extremely capital intensive projects. Anything measured in miles is expensive. And if you look at just the infrastructure itself, this is where guyed towers shine. I did a demo in a previous video showing just how much structural rigidity you can get out of very thin sections of steel when you add guyed supports. Tons of antenna towers are built this way. We use a similar strategy with transmission towers, and they come in a few flavors. V towers use two legs that diverge from a single foundation upward to support a cross-arm. Portal towers use straight legs with two foundations. There are even cross-rope suspension towers that use wire rope between the towers to hold up the energized lines.

Guyed towers are lighter, they go up quicker, and are often less expensive than the alternatives, but you actually don’t see them used very often. They’re mostly limited to very remote, unpopulated, flat areas where the main bottleneck for construction is transportation. The relatively lightweight tower sections are easier to move, even if you have to use a helicopter. The problem is that they take up a lot of space. Acquiring the land below a transmission line, called the right-of-way, is one of the most expensive and legally complex parts of a transmission project. Of course there are a lot of technical and engineering challenges, but the land issues often drive the schedule and play a big role in the cost. Because the anchors for guyed towers have to be relatively far away from the tower itself, you just end up with a huge footprint at each tower. This is made worse in agricultural areas where the long guys turn cropland into unusable space and create a hazard for tractors, combines, and crop dusters. Guyed towers work where land is cheap and unused, but we turn to alternatives when we need to minimize the amount of right-of-way around a tower, or at least make it more usable.

H-frame towers are kind of the next step in that direction. They’re simple: just two vertical supports and a cross-arm. But they can be made self-supporting so you don’t need the guys, freeing up a big footprint around the towers. They’re usually made from wood or tubular steel poles. Since they arrange the three phases horizontally, H-frames achieve safe conductor spacing without stacking up into the vertical dimension, which is beneficial around airports or places with height restrictions. But that does mean they’re wider (compared to towers that hold each phase above the others), so they’re still not optimal when it comes to the right-of-way below. And the two-legged design isn’t as structurally efficient as it gets taller, so H-frames are typically only used for lower voltage transmission lines, like 230 kV and below. To go bigger, we often need more legs.

If you picture a transmission tower in your head, it’s probably a self-supporting lattice tower. They’re pretty much the quintessential pylon. That’s because they often strike a better balance between footprint size, construction speed, and material efficiency. They’re still pretty lightweight, using a trusswork of small steel members. But they’re strong enough to withstand all the forces required without needing guys. And they come in a practically endless variety of shapes. For single circuit lines, the phases can be spaced horizontally along a cross arm; or they can be held in a triangle on what’s often called a delta tower. Many transmission lines carry two circuits, which means six energized conductors. Plus almost all transmission towers have one or two static lines above the energized lines to intercept lightning strikes and sometimes carry fiber optic communications between substations.

A lot of the variety in lattice towers just comes from the variety of voltages used on the grid. In general, the longer the transmission line, the more cost effective it is to step up to higher voltages in order to minimize energy losses. When ceramic insulators were more standardized, it was easy to tell the voltage of a line just by counting the discs. Multiply the number by 15 and that’s roughly the voltage in kV. It doesn’t work that well anymore with the proliferation of polymer and composite materials that don’t use standardized discs, but with a trained eye, you can usually figure it out, even without going on the internet to look it up. Look at the length of the insulators: 6 feet or 2 meters, that’s probably 138 to 230 kV. If it’s a 15-foot rod or longer, that’s probably 500 kV or above. You can also look at how many conductors are bundled to form each phase. Single thick wires create strong electric fields, power losses, and corona discharge at voltages above around 200 kV. If there are 2 conductors per phase, it’s probably 230 or 345 kV. If 3 or more, you’re probably looking at 500 kV or higher.

And just look at the size of the towers. They can be absolutely monumental. I think a 500 kilovolt transmission line is pretty impressive. I might even be tempted to pull over and take a look if it’s one I haven’t seen before. A 765 kilovolt line is, at least in my opinion, a feat on the order of our most impressive skyscrapers: maybe not worth flying to go see, but at least a few hours on a road trip for a visit. That is an incredible amount of electric potential. There aren’t any close to me, but there are a few in North America, particularly in the Ohio River Valley, Appalachia, and Quebec.

At a quick glance, all the towers along a transmission line may look the same, but they’re almost always not. That’s because different parts of the line have different structural demands. A tangent or suspension tower is the simplest. This is a tower supporting a relatively straight part of the line. The conductors come in and leave in the same direction, so the lateral forces are balanced. It’s just weight and wind to withstand, so these towers are usually the lightest ones. You can tell them apart from other types because the insulators are hanging straight down.

Towers get more interesting when they have to support lateral loads from the conductors. This can happen when the alignment makes a turn or at long crossings like over highways or rivers. It also happens at the end where a transmission line terminates. That’s why stronger towers are often called dead-ends. But, besides supporting typical lateral loads, they serve one more critical purpose. Let’s look back at a tangent tower. If there were a failure along the line, like a break in the conductor, the balance in tension this tower depends on would disappear. With unbalanced lateral loads, the tower could fail, potentially imposing an even stronger force on the next tower in the line. A single failure could cascade into a series of collapses that destroys miles of towers in a matter of minutes or seconds. So, dead-end towers are installed at intervals along a line as a sort of structural firewall to limit the extent of this kind of cascade.

You can often identify dead-ends because the insulators have a horizontal component; they are obviously pulling on the conductors rather than just suspending them from above. The towers themselves are usually made from larger and thicker steel members to support the extra load, so if you look closely, you can tell the difference between a tangent and dead-end tower from the bulk alone, like a bold font compared to its normal weight. But that bulk causes another problem.

A lot of the opposition to transmission lines these days is just focused on how they look. And, I kind of get it. If you’re not someone like me who enjoys peering into the guts of the built environment, these lines can kind of clutter up what might otherwise be a pristine view of the countryside. Personally, I like the look of latticed steel, but there is an alternative that many people prefer: the tubular monopole.

With a single, self-supporting column, I guess they are a little sleeker and less industrial-chic. But the benefits aren’t just in looks. They also have a tiny footprint, perfect for congested areas where land costs or environmental constraints demand as narrow a right-of-way as possible. Also, with a single foundation (as opposed to the two for H-frames or four for lattice towers), you have a lot less disturbance of the ground during construction.

Of course, when you look at the towers, you have to pay attention to the conductors they support. Maybe you can see stockbridge dampers that mitigate vibrations in the wind. Or you might notice marker balls to make the conductors more visible near airports, across water bodies, or other places where hidden wires might cause problems at height. You probably can’t tell, just by looking, how the conductors are made up. But there is a ton of engineering that goes into it. In fact, there are so many choices in size, stranding, and materials that the industry has developed codenames for most types of overhead cables. Aluminum conductors with steel reinforcing cables have bird nicknames like penguin, hawk, or drake. All-aluminum wires are usually flowers or insects. And all-aluminum alloy conductors are named after cities.

Usually, when we talk about the capacity of the grid, we focus on the generation: how many power plants, solar farms, and wind turbines make up the portfolio of power we use. In many parts of the world though, transmission lines are the main constraint to increasing capacity of the grid. We can generate the electricity, but we struggle to deliver it where it’s needed. That’s partly because transmission projects are expensive and controversial. People don’t love having these conspicuous, obtrusive extension cords stretched across the sky. And because the rights-of-way have to be cleared of trees to prevent short circuits, they can have major environmental impacts as well. So why don’t we just send more power through the ones we already have?

The maximum current rating of a transmission line is an interesting thing, at least it is to me. I usually think of a power or current rating to be some hidden limit that was meticulously calculated or tested for a particular device. For transmission line conductors, it’s a lot simpler than that. Even though they usually look “saggy”, transmission lines are under quite a bit of tension. Like all metals, when they get hot, they expand, and they sag even more. So, the current limit is really just how hot they can get before they sag down too low to maintain adequate clearance from the trees and the ground. Of course, with more current you get more heat. But because these lines are just out in the open, their rating can also be a function of the weather like sunlight and wind speed. In fact, many transmission lines in the US don’t just have a single static number as the current rating but instead use forecasted or real-time measurements of ambient conditions to dynamically update the maximum allowable current on the lines. That allows us to take advantage of previously unused capacity when ambient conditions allow. But because the current rating is really just a function of how much the lines sag, what if we just reduce the sag?

You could do it by simply increasing the tension on the lines, pulling them tauter. I won’t go into the details of catenary engineering, but put simply, reducing the sag by half requires double the tension. It’s an exponential relationship. Pretty quickly you reach a point where the additional tension exceeds the strength of the conductor. Of course, you could use a stronger conductor, but that would make it heavier, and then you’re back to where you started. But there is another way.

Turns out that you can put a lot more current through an existing transmission line just by changing out conductors to more advanced materials, like those that include ceramics or carbon fiber, so they expand less with temperature. This idea is called reconductoring. Because the towers have already been built, the right-of-way acquired, and the permitting process completed, reconductoring can significantly increase transmission capacity for a much lower cost than building a brand new line.

It’s easy to think of the grid as kind of a static machine; once it’s built out, it just works, and that’s the end of it. But reconductoring is only one of the many examples of how we just keep innovating, making it easier to balance the factors that drive these projects. With so many constraints in play, it’s almost impossible to put anything into a category on the grid. There’s so much variety. I always pay attention to electrical infrastructure, both at home and when I’m somewhere new, trying to puzzle out why the engineers made the decisions they did. I love the electrical grid; I think it’s worth appreciating. And I hope learning a bit more about how it’s put together makes you feel the same way.

November 17, 2026 /Wesley Crump
  • Newer
  • Older